The main component of honeycomb activated carbon is activated carbon, the normal compressive strength is greater than 0.8MPa, the commonly used specifications are 50*50*100mm, 100*100*100mm, the operating temperature is less than 400 degrees Celsius, the hole density is 100 holes/square inch, 150 holes/square inch empty tower With a wind speed of 0.8 m/s, the specific surface area is greater than 700 square/g, and the appearance is smooth without cracks.
There are two types of honeycomb activated carbon, water-resistant and non-water-resistant, all index parameters are the same, specifications and sizes can be produced according to customer requirements, conventional 100*100*100mm, 50*50*100mm. Honeycomb activated carbon is widely used in various organic waste gas purification systems with low concentration and large air volume. pellet activated carbon The pollutants that can be removed with honeycomb activated carbon to varying degrees are: nitrogen oxide, carbon tetrachloride, chlorine, benzene, diformaldehyde, acetone, ethanol, ether, methanol, acetic acid, ethyl ester, styrene, phosgene, malodorous gas and other acids Alkaline gas.
Honeycomb activated carbon has a large specific surface area, microporous structure, high adsorption capacity, high surface activated carbon products, and is widely used in air pollution control. The honeycomb activated carbon adsorption method is selected, that is, the exhaust gas is in contact with the porous activated carbon with a large surface, and the pollutants in the exhaust gas are adsorbed and decomposed, thereby playing a purification role. Modified honeycomb activated carbon after impregnation with chemical reagents can remove: acid mist, alkali mist, amine, mercaptan, sulfur dichloride, hydrogen sulfide, ammonia, mercury, carbon monochloride, dioxins, etc.
Honeycomb activated carbon is generally filled in purification equipment and equipment. Because honeycomb activated carbon is a qualitative carbon block, the equipment and equipment should be made in accordance with the specifications and dimensions of honeycomb activated carbon, or consult technical guidance.
Operation method: Carefully open the honeycomb activated carbon packaging box, take out the activated carbon block, peel off the outer moisture-proof wax paper, and stack the honeycomb activated carbon in the filter in a neat order. activated carbon suppliers Note that; handle with care, not easy to squeeze, collide, ( Non-waterproof carbon must be moisture-proof and isolated from water to prevent honeycomb activated carbon from crushing in water).
