Date & time | Jun 1 '19 |
Location | United States |
Creator | HP Printer Customer Care |
There is
a chip that is present in every HP color cartridge which works primarily for
communicating with the printer. It is because of this chip that it becomes
necessary that you reset the cartridges after refilling or replacing them. This
chip helps in indicating the message of low in the cartridges. It has been seen
that the error message of low ink would be displayed even after replacing the
cartridges and this is where it becomes crucial that you reset them. When you
manually reset the ink cartridges, it would save a lot of time and money. You
would also be saved from encountering the unnecessary warning of low ink. You
can understand this issue ideally by going through this blog. The users also
have the option of promptly connecting with HP Printer Customer Support Number to avail assistance regarding this
issue.
Steps to reset HP cartridges 57, 28 and 22 are as
stated below:
·
After you have successfully refilled or
replaced the cartridges, take a look at the bottom of the cartridge. You would
be able to find six copper contact strips at the bottom.
·
Make sure that you keep the cartridge in
front of you in such a manner that you can see the copper strips facing you.
·
Now put a piece of tape on the top of the
contact in the second column.
·
After you have placed the tape, put the
cartridge back into the printer. If you face an error message ignore it and
then print a test page.
·
Now remove the cartridge from the printer
and keep the tape on it. Further place another tape on the top of the contact
which is in the sixth row.
·
You would now again have to place the
cartridge in the printer and print a test page ignoring the error message.
·
Finally, remove the cartridge again and
take off all the tape that you had put on the contacts.
·
Now when you replace the cartridge in the
printer, you would be able to see that the ink level is displayed as full.
Opt
for cycling the Cartridges
·
You can take up this option if the first
option does not work for you. In this process, you would require extra color
cartridges.
·
Now place the refilled cartridge in the
printer while ignoring the error message that is being displayed.
·
Take the refilled cartridge out and then
replace it with the spare cartridge. Ignore the error message that you would
receive and choose to print an alignment page.
·
Once you are done with this step, remove
the second cartridge and replace it with the other spare cartridge that you
have.
·
Again opt to print an alignment page.
·
Once you have done all the said steps,
remove and replace all the spare cartridges with the refilled cartridges. After
you have done this step, you would be able to see that your ink levels are now
shown to be full.
If you feel you would require more assistance while putting these steps into action, then you can choose to connect with the HP Printer Customer Service. They would provide you with all the required assistance in this aspect.
Read more: HP printer support Number
Source
URL: How to reset an HP color
Cartridge
The Wall